Latest from JU by Yared

286 unique MCQs from Jimma University exit exam material compiled by Yared. Hospital systems, imaging, instrumentation, biomechanics, design, and more.

Practice controls

Bank, page size, and course section

Questions per page Course / section

Showing 1–10 of 286

Healthcare Technology Management

Latest from JU by Yared

A critical safety feature in biomedical instruments that directly interface with a patient (e.g., ECG monitor) is electrical isolation. Its main purpose is to:

A. Amplify the signal significantly
B. Prevent micro-shock or macro-shock hazards to the patient
C. Filter out high-frequency noise
D. Improve the instrument's battery life

Bioinstrumentation

Latest from JU by Yared

A diverging mirror has a focal length of 16 cm. An object which is 9 cm tall is placed 10 cm in front of this mirror. Which of the following statement is true?

A. Distance of image is -6.15cm
B. Height of image is 5.5cm
C. The magnification is 0.651
D. All

Biomaterials

Latest from JU by Yared

A metal with a face-centered cubic (FCC) structure typically shows:

A. Low ductility
B. High brittleness
C. High ductility and formability
D. Magnetic behavior only

Biomedical Design

Latest from JU by Yared

A single product specification consists of a metric and a...?

A. Cost
B. Value
C. Unit
D. Constraint

Medical Imaging

Latest from JU by Yared

A technique that uses ultrasound to measure the velocity of blood flow is ?

A. Brightness mode US
B. Motion mode US
C. Amplitude mode US
D. Doppler mode US

Bio-fluid Mechanics

Latest from JU by Yared

According to Poiseuille’s law, the greatest resistance in the circulatory system occur in

A. Aorta
B. Arterioles
C. Capillaries
D. Veins

Biomedical Design

Latest from JU by Yared

According to the Engineering Design Process (EDP), what is the primary purpose of building a prototype?

A. To finalize the project budget
B. To create a model to test against requirements
C. To immediately begin mass production
D. To write the final project report

Medical Device Regulations

Latest from JU by Yared

According to the FDA classification, a basic device like a bandage or reflex hammer is considered:

A. Class II
B. Class III
C. Class I
D. Class IV

Biomedical Design

Latest from JU by Yared

According to the principles of prototyping, what is a key advantage of using a prototype?

A. It guarantees the final product will be successful.
B. It replaces the need for final product testing.
C. It can reduce the risk of costly iterations later in the development process.
D. It is always cheaper than designing the final product.

Medical Device Regulations

Latest from JU by Yared

According to the risk management framework for medical devices, what does the "As-Low-As-Reasonably-Practical (ALARP)" region represent?

A. Risks that are negligible and require no further action.
B. Risks that are unacceptable under any circumstances.
C. Risks that are tolerated only if further risk reduction is impracticable or disproportionate.
D. Risks that are only related to the device's cost.

Latest from JU by Yared

286 unique MCQs from Jimma University exit exam material compiled by Yared. Hospital systems, imaging, instrumentation, biomechanics, design, and more.

Practice controls

Bank, page size, and course section

Questions per page Course / section

Showing 1–10 of 286

Healthcare Technology Management

Latest from JU by Yared

A critical safety feature in biomedical instruments that directly interface with a patient (e.g., ECG monitor) is electrical isolation. Its main purpose is to:

A. Amplify the signal significantly
B. Prevent micro-shock or macro-shock hazards to the patient
C. Filter out high-frequency noise
D. Improve the instrument's battery life

Bioinstrumentation

Latest from JU by Yared

A diverging mirror has a focal length of 16 cm. An object which is 9 cm tall is placed 10 cm in front of this mirror. Which of the following statement is true?

A. Distance of image is -6.15cm
B. Height of image is 5.5cm
C. The magnification is 0.651
D. All

Biomaterials

Latest from JU by Yared

A metal with a face-centered cubic (FCC) structure typically shows:

A. Low ductility
B. High brittleness
C. High ductility and formability
D. Magnetic behavior only

Biomedical Design

Latest from JU by Yared

A single product specification consists of a metric and a...?

A. Cost
B. Value
C. Unit
D. Constraint

Medical Imaging

Latest from JU by Yared

A technique that uses ultrasound to measure the velocity of blood flow is ?

A. Brightness mode US
B. Motion mode US
C. Amplitude mode US
D. Doppler mode US

Bio-fluid Mechanics

Latest from JU by Yared

According to Poiseuille’s law, the greatest resistance in the circulatory system occur in

A. Aorta
B. Arterioles
C. Capillaries
D. Veins

Biomedical Design

Latest from JU by Yared

According to the Engineering Design Process (EDP), what is the primary purpose of building a prototype?

A. To finalize the project budget
B. To create a model to test against requirements
C. To immediately begin mass production
D. To write the final project report

Medical Device Regulations

Latest from JU by Yared

According to the FDA classification, a basic device like a bandage or reflex hammer is considered:

A. Class II
B. Class III
C. Class I
D. Class IV

Biomedical Design

Latest from JU by Yared

According to the principles of prototyping, what is a key advantage of using a prototype?

A. It guarantees the final product will be successful.
B. It replaces the need for final product testing.
C. It can reduce the risk of costly iterations later in the development process.
D. It is always cheaper than designing the final product.

Medical Device Regulations

Latest from JU by Yared

According to the risk management framework for medical devices, what does the "As-Low-As-Reasonably-Practical (ALARP)" region represent?

A. Risks that are negligible and require no further action.
B. Risks that are unacceptable under any circumstances.
C. Risks that are tolerated only if further risk reduction is impracticable or disproportionate.
D. Risks that are only related to the device's cost.

Exit exam blueprint & study guide

Practice controls

A critical safety feature in biomedical instruments that directly interface with a patient (e.g., ECG monitor) is electrical isolation. Its main purpose is to:*

A diverging mirror has a focal length of 16 cm. An object which is 9 cm tall is placed 10 cm in front of this mirror. Which of the following statement is true?*

A metal with a face-centered cubic (FCC) structure typically shows:*

A single product specification consists of a metric and a...?*

A technique that uses ultrasound to measure the velocity of blood flow is ?*

According to Poiseuille’s law, the greatest resistance in the circulatory system occur in*

According to the Engineering Design Process (EDP), what is the primary purpose of building a prototype?*

According to the FDA classification, a basic device like a bandage or reflex hammer is considered:*

According to the principles of prototyping, what is a key advantage of using a prototype?*

According to the risk management framework for medical devices, what does the "As-Low-As-Reasonably-Practical (ALARP)" region represent?*

Exit exam blueprint & study guide

Practice controls

A critical safety feature in biomedical instruments that directly interface with a patient (e.g., ECG monitor) is electrical isolation. Its main purpose is to:*

A diverging mirror has a focal length of 16 cm. An object which is 9 cm tall is placed 10 cm in front of this mirror. Which of the following statement is true?*

A metal with a face-centered cubic (FCC) structure typically shows:*

A single product specification consists of a metric and a...?*

A technique that uses ultrasound to measure the velocity of blood flow is ?*

According to Poiseuille’s law, the greatest resistance in the circulatory system occur in*

According to the Engineering Design Process (EDP), what is the primary purpose of building a prototype?*

According to the FDA classification, a basic device like a bandage or reflex hammer is considered:*

According to the principles of prototyping, what is a key advantage of using a prototype?*

According to the risk management framework for medical devices, what does the "As-Low-As-Reasonably-Practical (ALARP)" region represent?*

A critical safety feature in biomedical instruments that directly interface with a patient (e.g., ECG monitor) is electrical isolation. Its main purpose is to:

A diverging mirror has a focal length of 16 cm. An object which is 9 cm tall is placed 10 cm in front of this mirror. Which of the following statement is true?

A metal with a face-centered cubic (FCC) structure typically shows:

A single product specification consists of a metric and a...?

A technique that uses ultrasound to measure the velocity of blood flow is ?

According to Poiseuille’s law, the greatest resistance in the circulatory system occur in

According to the Engineering Design Process (EDP), what is the primary purpose of building a prototype?

According to the FDA classification, a basic device like a bandage or reflex hammer is considered:

According to the principles of prototyping, what is a key advantage of using a prototype?

According to the risk management framework for medical devices, what does the "As-Low-As-Reasonably-Practical (ALARP)" region represent?

A critical safety feature in biomedical instruments that directly interface with a patient (e.g., ECG monitor) is electrical isolation. Its main purpose is to:

A diverging mirror has a focal length of 16 cm. An object which is 9 cm tall is placed 10 cm in front of this mirror. Which of the following statement is true?

A metal with a face-centered cubic (FCC) structure typically shows:

A single product specification consists of a metric and a...?

A technique that uses ultrasound to measure the velocity of blood flow is ?

According to Poiseuille’s law, the greatest resistance in the circulatory system occur in

According to the Engineering Design Process (EDP), what is the primary purpose of building a prototype?

According to the FDA classification, a basic device like a bandage or reflex hammer is considered:

According to the principles of prototyping, what is a key advantage of using a prototype?

According to the risk management framework for medical devices, what does the "As-Low-As-Reasonably-Practical (ALARP)" region represent?